Feed Mixer Systems
Loadcell System
The system consists of four 30,000 lb capacity loadcells. They are situated under the four corners of the weighing platform. The cables are then routed to the junction box. From the junction box there is only one cable to the digital indicator. The digital indicator can drive a remote display which can be mounted so the weight readings are easier to view.
Fully compatible with our Computerized Scale.
Specifications:
- 30,000 lb. capacity each
- Compression type
- Zinc Plated
- 4 1/4" high
- 25' interface cables
Weigh Bar System
The system consists of four weigh bars. The most common is the 2 1/8". they have a capacity of 12,000 lb. each. They are situated horizontally under the four corners of the weighing platform. The cables are then routed to the junction box. From the junction box there is only one cable to the digital indicator. The digital indicator can drive a remote display which can be mounted so the weight readings easier to view.
Specifications:
- 12,000 lb. or 20,000 lb. capacities
- Full or half bridge systems
- Bending Beam type
- Zinc Plated
- 2 1/8" or 2 1/2" diameter
- 21' interface cables
- Optional mounting brackets available
Three Point Weighting System
This system uses the axle stubs and a hitch bar to provide a weigh scale. The axle stubs are made into weigh bars as is the hitch bar. When the end of the hitch is supported by the tractor or a jack, the wagon is then supported on three points giving a weighing system. The capacity is dependant on the existing axle stubs. The cables routed from each weigh bar to a junction box. From the junction box there is only one cable to the digital indicator. The digital indicator can be mounted in the tractor or on the front of the wagon on a swing arm. The digital indicator will drive a remote display which can be mounted so the weight readings are also easier to view
Specifications:
- Full or half bridge systems
- Bending Beam type
- 6-7" clearance from axle hub to frame
- 2 1/8" or 2 1/2" diameter
- 21' interface cables
| 
